Hanging picture frames doesn’t have to be a daunting task! Discover expert tips for displaying photos, canvases, and more without damaging your walls. Whether you’re dealing with sheetrock, stone, brick, concrete, or plaster, this guide provides step-by-step instructions and recommends the right tools for each surface. From using command hooks for lightweight pieces to finding studs in your wall without a stud finder, we’ve got you covered.
Hang Picture Frames on Sheetrock
When hanging picture frames on sheetrock, especially for pieces weighing more than 10 pounds, additional support is essential. The key is to secure the frames to studs, the wooden supports behind your walls typically spaced 16 inches apart in vertical lines. To find studs without a stud finder, there are a few things you can try.
If you have a razor, gently scrape the wall’s surface until you hit a stud. The resistance will be more noticeable over a stud. You can also try lightly knocking on the wall every inch or so and listening for the sound. A hollow sound indicates no stud, while a denser, less hollow sound suggests a stud. If that doesn’t work, use a magnet attached to a string and move it horizontally along the wall. When the magnet is attracted to a metal screw or nail in the stud, you’ve found it.
Hanging on Stone Surfaces
Hanging art on stone surfaces, whether above your fireplace or on a stone accent wall, might seem challenging, but fear not–it’s entirely achievable. Get a masonry drill bit, screws, wall anchors, and safety goggles. First, ensure the masonry drill bit you select fits your drill by opting for the same brand. It ensures compatibility. Before you begin, wear safety goggles to protect your eyes during the drilling process.
To avoid the complexity of drilling into the stone itself, focus on the mortar. Use the masonry drill bit to drill into the mortar, following the recommended bit diameter for the wall anchor. After drilling, insert the wall anchor into the hole you made in the mortar. It is a crucial step for stability. Add a screw into the wall anchor, leaving enough exposed to hang your artwork securely.
Hanging on Brick or Concrete Walls
Brick and concrete walls, prevalent in older and modern homes, pose a unique challenge when hanging picture frames. Traditional methods like hammering nails or inserting screws won’t cut it. Recognizing the difficulty of penetrating brick or concrete, specialized anchors and screws are your secret weapons. These will provide a secure grip on the tough surface.
For brick walls, try aieve brick wall clips or brick hook clips. For concrete walls, try concrete wall invisible hangers or three-piece cement pin hooks. By using these specialized tools, you can ensure a stable and secure hanging solution for your picture frames on brick or concrete walls. Elevate your décor without compromising on the integrity of your resilient walls.
Hanging Picture Frames on Plaster Walls
For homeowners with vintage properties built before 1950, the challenge of hanging picture frames on plaster walls requires a strategic approach. Plaster is delicate, and attempting to hammer a nail directly can lead to crumbling and create a mess. Interior designer Brad Smith, CEO of Omni Home Ideas, recommends a more careful method.
Before drilling into plaster, place a piece of tape over the selected spot. This precautionary measure helps contain plaster dust, preventing it from spreading during the drilling process. By following this approach, you can successfully hang picture frames on plaster walls without compromising their integrity.